4 Inch Electrical Pump

4 Inch Body PumpsDelivery 6~8 Weeks after PO


Description

The pump is a plunger pump, it needs to be driven by a motor and recommend using electric motor. These pumps can be used on wellhead control panel systems, Power packs on high-torque service tools. The pump application medium is hydraulic oil and it needs to be installed at a lower position than the tank. Before starting the pump, you must vent the air in the pump chamber.

Contact
Manual Pumps & Electrical Pumps

Features

»Choice of 0.64 l/min, 1.02 l/min, 1.4 l/min and 2.1 l/min 4 ratios.
»High-strength alloy steel pump body, and stainless steel shell optional. 
»Standard Buna N seals for -29~120°C service, other seals available. 
»Output pressures up to 15000 psi (1034 bar). 
»Pump can rotate clockwise and counterclockwise. 
»Large Flow, and very low noise.

Performance and Specification

1.Output flows are based on typical performance using 100 SUS (20 cSt) mineral oil at rated pressure.
2. MF means 20000psi female medium pressure connection
3. Ordering codes listed are standard. Other materials and types are available upon request. For special requirements, please contact us.

Dimensions

Repair kit

Repair kit:Contains the main seals